Klarstein Aurica RGB Bedienungsanleitung Seite 17

Installing the Carbon Filter
Note: Carbon Filter is not standard accessory, these can be purchased as an
accessory.
1
Activated carbon filter can be used to
trap odours.
3
Plug the activated carbon filter into the
unit and turn it in clockwise direction.
Repeat the same on the other side.
Make sure the filter is securely locked.
Otherwise, it would loosen and cause
dangerous. When activated carbon
filter attached, the suction power will
be lower.
2
In order to install the activated carbon
filter, the grease filter should be
detached first. Press the lock and pull it
downward.
4
Remove all blue protective film on
chimney and cooker hood, the
installation is now finished.
EN
17