Connecting Wires To Terminals - Kenwood KRC-694 Bedienungsanleitung

Connecting Wires to Terminals

Connector Function Guide
Pin Numbers for
Cable Color
ISO Connectors
External Power
Connector
Yellow
A–4
Blue/White
A–5
A–7 Red
A–8 Black
Speaker
Connector
B–1 Purple
B–2 Purple/Black
Gray
B–3
Gray/Black
B–4
B–5 White
B–6 White/Black
B–7 Green
Green/Black
B–8
KENWOOD disc changer input
To connect the Disc
changer, consult your
Disc changer manual.
To Steering remote
(Optional accessory)
Functions
Battery wire (Yellow)
Battery
Power Control
Ignition (ACC)
Earth (Ground)
Connection
Rear Right (+)
Rear Right (–)
Front Right (+)
Front Right (–)
Front Left (+)
A–4 Pin (Yellow)
Front Left (–)
Rear Left (+)
Connector A
Rear Left (–)
Connector B
10
Rear left
14
output (White)
15
REMO.CONT
Fuse (10A) 13
Wiring harness
(Accessory1)
17
TEL mute wire (Brown)
6A
Ignition wire (Red) 7A
If no connections are made,
do not let the wire come out
from the tab.
See page 280
Power control/ Motor
antenna control wire
A–7 Pin (Red) 8 (Blue/White)
9
8 6 4 2
7 5 3 1
8 6 4 2
7 5 3 1
— 27 —
Antenna Cord (ISO)
Antenna Conversion Adaptor
(ISO–JASO) (Accessory3)
FM/AM antenna
input 3
Rear right
output (Red)
4
16
Connect to the terminal
TEL MUTE
that is grounded when
either the telephone rings
or during conversation.
To connect the
KENWOOD navigation
system, consult your
navigation manual.
18a
20
Connect either to the
P.CONT
power control terminal
ANT.CONT
when using the optional
power amplifier, or to the
antenna control terminal in
the vehicle.
1
2
21
22
23