Manual Clock Adjustment; Synchronize Clock; Dsi (Disabled System Indicator); Selectable Illumination - Kenwood KRC-694 Bedienungsanleitung

Menu system

Manual Clock Adjustment

This adjustment can be done when the <Synchronize Clock> (page
22) is set as OFF.
1
Select Clock Adjustment mode
Press the [FM] or [AM] button.
Select the "Clock Adjust"/ "CLK ADJ" display.
2
Enter Clock Adjust mode
Press the [4] or [¢] button for at least 1 second.
The clock display blinks.
3
Adjust the hours
Press the [FM] or [AM] button.
Adjust the minutes
Press the [4] or [¢] button.
4
Exit Clock adjustment mode
Press the [MENU] button.

Synchronize Clock

Synchronizing the RDS station time data and this unit's clock.
Display
"SYNC ON"
"SYNC OFF"
It takes 3 to 4 minutes to synchronize the clock.
Setting
Synchronizes the time.
Adjust the time manually.
— 22 —

DSI (Disabled System Indicator)

A red indicator will blink on the unit after the faceplate is
removed, warning potential thieves.
Display
"DSI ON"
"DSI OFF"

Selectable Illumination

Selecting the button illumination color as green or red.
Display
"Button Red"/ "KEY RED"
"Button Green"/ "KEY GRN"

Switching Display Type

Setting the Display type.
Display Setting
"Display C"/ "DISP C" Demonstration.
"Display A"/ "DISP A" Normal display type.
"Display B"/ "DISP B" Silent display type.

Contrast Adjustment

Adjusting the display contrast.
Setting
LED flashes.
LED OFF.
Setting
The illumination color is red.
The illumination color is green.