auna 10031854 Bedienungsanleitung Seite 27

Auto Memory Stations (AMS)
• In FM receive mode, long press the "AMS (6)" button to entry auto
memory stations function.
• The FM radio will turn into AMS mode and searching up from current
receiving radio frequency (example; 90.3MHz) to until a circle of FM
frequency range, from 90.4MHz ~ 108.0MHz then 87.5 ~ 90.2MHz,
those seeks and received FM station's frequencies will be memory and
programed into preset list.
• As the design, the current receiving radio frequency (90.3MHz) will
become preset "P01" and still as current receiving radio station for
continue uses.
Note: All previous preset radio frequencies will be erased when
every time you using the AMS function. The AMS function will be
stop automatically if preset number "P01 ~ P40" are renew and fully
programed.
Recall and Change Preset Number
• In current receiving radio frequency short press the "PRE/MEM (9)"
button, the current radio frequency preset number will be recalled for 3
seconds.
• Then short press the "TUN+ (11)" or "TUN- (12)" button to choose your
desired preset number (P01 – P40) for radio listening.
• The LED display will switch back from preset screen to chosen radio
frequency screen.
• Choose the desired preset number at any time you want by the above
mentioned steps.
EN
27