auna 10031854 Bedienungsanleitung Seite 26

EN
26
FM Mute
• If you want to mute the radio sound for a while, short press the "Play/
Pause (6)" button, the sound will mute and the FM radio frequency is
blinking as identify.
• Short press the "Play/Pause (6)" button to resume.
FM Station
• The first time use the FM radio function; the frequency 87.5MHz will
show on LED segments display and wait for tuning radio stations;
• Last used radio channel frequency being recall for FM radio, when you
switch mode in-between the FM mode and BT mode, or power off and
on the device.
Manual Tune Radio Frequency
• In FM radio mode press the "TUN- (11)" or "TUN+ (12)" button for steps
frequency down or up to receive next station, each press will step down
or up the frequency by 0.1 MHz.
• Press the "TUN- (11)" or "TUN+ (12)" button quickly until to your desired
radio frequency of radio station.
• Long press the "TUN- (11)" or "TUN+ (12)" button for 2 seconds to entry
into manual searching mode. This mode allows keeping tuning down /
up and being stop until next radio station frequency is received.
Manual Store for Tuned Radio Frequency into Preset Memory
1 After the above mentioned manual tune radio frequency, the tuned
current station's frequency can be stored by;.
2 Long press the "PRE/MEM (9)" button, the preset "P01" will appear and
blinking on display.
3 Then short press the "TUN+ (11)" or "TUN- (12)" button to choose your
desired preset number (P--) where to store the tuned radio's frequency;.
4 Choose "P30" for example, and then short press again the "PRE/MEM
(9)" button to confirm the storage and the screen will switch back to
current radio's frequency from preset mode.