Cleaning The Condensate Receptacle; Cleaning And Refilling The Syphon; Inspection Of Combustion Chamber - Elco R601 Betriebsanleitung

Maintenance

Cleaning the condensate receptacle

Cleaning and refilling the syphon

Inspection of combustion chamber

1
3
2
5
Cleaning the condensate receptacle
•
Disconnect the plug of the fluegas
temperature sensor (1);
•
Remove the internal fluegas pipe (2)
of the boiler in order to create access
to the condensate receptacle;
•
Clean the receptacle (3);
•
Mount the fluegas pipe back in
position when the cleaning is finished;
•
Connect the plug of the fluegas
temperature sensor.
Cleaning and refilling the syphon
•
Remove the syphon (4) from the
condensate connection;
•
Clean and fill it with fresh water;
•
Mount the syphon back in the original
position.
Inspection of combustion chamber
The sight glass (5) is positioned on the
left hand side of the boiler.
•
Inspect the combustion chamber by
viewing through the sight glass.
Cleaning can be done with water:
•
Remove the viewing mirror and glass
from the sight glass holder;
•
Stick a garden hose through the sight
glass holder and rinse the heat ex-
changer with water;
•
Reassemble the sight glass.
4
29