Charging The Battery; Energy-Saving Mode (Maximum Saving); Battery-Saving Mode - Crosscall TREKKER-X4 Bedienungsanleitung

N.B. Battery consumption can be influenced by the quality of the network, the brightness
of the screen, the connections enabled (WiFi, Bluetooth, NFC), location services, etc.

CHARGING THE BATTERY

Be sure to fully charge your device before first use using the AC charger supplied.
Never charge your phone using the X-LINK
connection at the same time, or it may shorten the life of your phone's devices.
1. Open the watertight plug and connect the USB cable to the USB power adapter, then
plug the end of the USB cable into the USB port.
2. Plug the USB power adapter into an electrical outlet.
3. When the battery is fully charged, unplug the phone from the charger. First unplug the
charger from the device, then unplug it from the electrical outlet.
ENERGY SAVING MODE (MAXIMUM SAVING)
This feature limits your phone's performance to basic functions (calls, SMS/MMS, internet
and SOS + 4 programmable functions). The screen changes to black and white to reduce
power consumption.
Accessible and configurable via: Settings > Battery >
Or: via the shortcut in the notification bar (by swiping from the top to the bottom of the
screen), on the second page, icon > energy saving mode.
To disable the energy saving mode, click on
BATTERY SAVING MODE
This mode is less restrictive than the "energy saving" mode. It dims the screen of your
phone and limits CPU performance to conserve battery power.
Accessible via the notification bar (by swiping from the top to the bottom of the screen),
energy saving mode icon.
OR via Settings > Battery > Battery Saver
To disable this mode, press the same icon again. If you hold down this icon for a few
seconds, you will see information about your battery status.
BATTERY TIPS AND PRECAUTIONS
• Do not remove the battery from your TREKKER-X4 yourself. If you encounter a problem,
contact Crosscall Customer Services.
• Use the charger included in your original TREKKER-X4 box.
• Do not expose it to temperatures above 60ºC/140°F.
• Do not tamper with your mobile using sharp metal objects because this may puncture
the battery.
• If your phone has been crushed or severely damaged and the battery is affected, do
not touch your phone and contact Customer Service who will tell you what procedure
to follow.
magnetic connection and the USB
TM
ICON> Power Saving Mode
> Disable energy saving mode.
53