Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Label of individual components
1
2
3
1. Mouthpiece and Mouthpiece slot
2. LCD Display (3 digits with unit ‰ and mg/L and 4 digits
with unit % BAC)
3. Start button
4. Air outlet (always keep this part unblocked)
5. Battery compartment cover (at the back of the device)
17
This way you receive results that are as accurate as possible
A) Wait at least 15 minutes after your last sip of alcohol. Do not
eat, drink or smoke during that time.
B) Do not open the casing.
C) Do not keep the breathalyzer in cold, hot, moist or badly
ventilated places.
D) Keep the breathalyzer out of the reach of children.
E) Conduct three inlet tests after long storage before conduc-
4
ting the actual alcohol test.
F) Do not drop the breathalyzer.
G) Change the battery if it is depleted. Diminished battery
capacity leads to incorrect test results.
H) Do not conduct tests in loud (sound waves disrupt the
sensor), drafty or poorly ventilated places.
I) After a test result of 1.000 per mill (per mill = EU setting) /
0.100 % BAC (% BAC = US setting) / 0.500 mg/L (mg/L = UK
setting) or higher the sensor needs rest time. In this case wait
at least three minutes before starting the next test.
J) Do not conduct tests in very cold, very hot or an unventila-
ted, smoky ambience.
K) Store the breathalyzer in a way to avoid penetration by dust
or liquids.
L) Blowing too hard may cause damage to the sensor as saliva
flows into it.
5
18
Werbung
