Turning Off The Roger Beep - AUDIOLINE PMR 012 Bedienungsanleitung

- Operation -
Note:
If a call code between 1 and 38 has been set, the search will be carried
out only on the 8 channels with the selected call code. If the call code is 0,
all 8 channels and the possible combinations with the 38 call codes will be
scanned.
If you want to completely remove a channel from the search, please
proceed as follows. As soon as the channel has been found in the channel
+
search, press and hold the or button for three seconds. You will
hear a signal tone and the channel search will be resumed. All channels
will only be available again for channel search after the radio has been
switched off and on again.
4.13

Turning off the Roger beep

The person you are speaking to will hear a signal tone (Roger beep) when
you have released the talk button. This will indicate to the other subscriber
that you have finished speaking and are waiting for a reply. This Roger
beep can also be switched off.
Switching the Roger beep on or off
1. Switch off the radio.
+
2. Hold the button pressed and switch on the radio again.
If the Roger beep is activated, the indicator will appear in the
display.
37