Vox Mode; Switching The Roger Beep On/Off - AUDIOLINE PMR Easy 006 Bedienungsanleitung

3.10 VOX mode

In VOX mode, the radio will automatically start to transmit as soon as
your voice or another noise is detected. It is not necessary to press
the call button.
Two sensitivity levels can be set for VOX mode. With setting 1, a soft
voice will be transmitted whereas, with setting 2, only loud voices will
be transmitted.
1. Press the MENU button briefly three times. The
flash.
2. The following settings can be made using the
buttons.
0 = VOX mode off
1 = Sensitivity for soft voices
2 = Sensitivity for loud voices
3. Confirm the selection with the PUSH TO TALK button on the left-
hand side or wait for 10 seconds until the display returns to the
normal operating mode once more.
When VOX mode is activated, the
display.

3.11 Switching the Roger beep on/off

The Roger beep signals to the other caller that it is now possible to
speak. This signal tone on releasing the PUSH TO TALK button can
be switched on and off.
1. Press the MENU button briefly four times. The
flash.
2. The Roger beep can now be switched On and Off using the
and
3. Confirm the selection with the PUSH TO TALK button on the left-
hand side or wait for 10 seconds until the display returns to the
normal operating mode once more.
When the Roger beep is activated, the
display.
- Operation -
buttons.
symbol will appear in the
indicator appears in the
indicator will
and
indicator will
25