The Vox Mode; Using Vox Mode Without The Headset; Using Vox Mode With The Headset - AUDIOLINE PMR 012 Bedienungsanleitung

4.9

The VOX mode

In VOX mode, the radio will automatically start to transmit as soon as your
voice or another noise is detected. It is not necessary to press the call
button.
The VOX mode can be used with the radios themselves or with the
headsets provided.
4.9.1

Using VOX mode without the headset

Switch on the radio while pressing the talk button
will appear in the display and the VOX mode will be activated.
Now speak into the radio normally. If the set sensitivity is achieved, the
radio will automatically start to transmit.
To switch off VOX mode, press the talk button
on the VOX mode again at any time by pressing the talk button very
briefly.
4.9.2

Using VOX mode with the headset

Switch off the radio. Open the connector cover on the left-hand side and
insert the headset plug into the socket provided for the purpose.
Now switch on the radio. The
the VOX mode will be activated.
NOTE: Do not connect the headset to the radio when it is switched on. In
this case, the radio will transmit continuously. Remove the headset and
then switch off the radio.
34
- Operation -
indicator will appear in the display and
VOX
. The indicator
VOX
once. You can switch