Selecting A Call Tone; Switching The Roger Beep On/Off - AUDIOLINE PMR Easy 010 Bedienungsanleitung

3.10 Selecting a call tone

You can transmit a call tone to the other walkie-talkies using the CALL
button when you want to begin a call. 5 different melodies are
available for this purpose.
1. Press the MODE button repeatedly
until CA appears in the display.
2. Select the required call tone
between 1 and 5 using the
buttons.
3. Confirm your selection with the TALK button.

3.11 Switching the Roger beep on/off

The Roger beep signals to the other caller that it is now possible to
speak. This signal tone on releasing the TALK button can be switched
on or off.
1. Press the MODE button repeatedly
until AG appears in the display.
2. The Roger beep can now be
switched on and off using the
CHANNEL + and – buttons.
3. Confirm your selection with the
TALK button.
28
- Operation -
and