Preparing The Telephone - switel TE18 Bedienungsanleitung

Connecting the receiver
Use the helix cable to connect the receiver to the telephone base unit. The helix cable
has two identical connectors; plug one end of the cable in the helix cable socket at the
bottom end of the receiver and the other end of the cable in the helix cable socket on
the underside of the base station. The plugs engage in the sockets audibly.
Connecting the telephone cable
Plug the telephone connection cable in the telephone socket on the rear of the tele­
phone until it audibly engages. Plug the other end of the telephone connection cable in
the telephone line socket.
If the plug on the telephone connection cable does not fit in telephone line socket, use
the telephone connection adapter enclosed or contact your network operator.
Telephone line socket
Wall installation
The telephone can also be installed on a wall. You require two screws in order to fix the
telephone on a wall. Drill two holes at a distance corresponding to the slots (100 mm
apart) and insert the screws leaving approx. 5 mm projecting from the wall. Align the
slots in the telephone to the screws, fit the screws in the slots and slide the telephone
downwards a little.

Preparing the Telephone

Receiver connection
27