Display Settings - Kenwood DPX-M3100BT Bedienungsanleitung

AUDIO SETTINGS
• Before making an adjustment for [DISTANCE] and [GAIN] of [DTA SETTINGS], select the
speaker you want to adjust:
When 2-way crossover is selected:
FRONT LEFT/FRONT RIGHT/REAR LEFT/REAR RIGHT/SUBWOOFER
– You can only select [REAR LEFT], [REAR RIGHT] and [SUBWOOFER] if a setting other
than [NONE] is selected for [REAR] and [SUBWOOFER] of [SPEAKER SIZE]. ( 21)
When 3-way crossover is selected:
TWEETER LEFT/TWEETER RIGHT/MID LEFT/MID RIGHT/WOOFER
– You can only select [WOOFER] if a setting other than [NONE] is selected for [WOOFER] of
[SPEAKER SIZE]. ( 22)
• [R - SP LOCATION] of [CAR SETTINGS] is selectable only if:
– 2-way crossover is selected. ( 6)
– A setting other than [NONE] is selected for [REAR] of [SPEAKER SIZE]. ( 21)
Determining the value for [DISTANCE] and [GAIN] of [DTA SETTINGS]
If you specify the distance from the center of the
currently set listening position to every speaker,
the delay time will be automatically computed
and set.
1 Determine the center of the currently set
listening position as the reference point.
2 Measure the distances from the reference
point to the speakers.
3 Calculate the differences between the
distance of the furthest speaker (rear
speaker) and other speakers.
4 Set the [DISTANCE] calculated in step
individual speakers.
5 Adjust [GAIN] for individual speakers.
Example: When [FRONT ALL] is selected as the
listening position

DISPLAY SETTINGS

Zone identification for color and brightness settings
Set the dimmer
Press and hold DISP to turn on or off the dimmer.
• If you have set [DIMMER TIME] ( 24), it will be canceled once you press
and hold this button.
Other settings
1
Press the volume knob to enter [FUNCTION].
2
Turn the volume knob to select an item ( 24), then press the
knob.
3 2
Repeat step until the desired item is selected/activated or follow
the instructions stated on the selected item.
3
for
4
Press and hold
To return to the previous setting item, press
to exit.
.
23
ENGLISH