Radio; Other Settings - Kenwood DPX-M3100BT Bedienungsanleitung

GETTING STARTED
Change the crossover type
1 Press repeatedly to enter STANDBY.
2 Press and hold number buttons 4 and 5 to enter crossover select.
The current crossover type appears.
3 Turn the volume knob to select "2WAY" or "3WAY", then press the
knob.
4 Turn the volume knob to select "YES" or "NO", then press the knob.
The selected crossover type appears.
• To cancel, press and hold
• To adjust the selected crossover settings, ( 21, 22).
Caution
Select a crossover type according to how the speakers are connected.
( 33, 34)
If you select a wrong type:
• The speakers may damage.
• The output sound level may be extremely high or low.
6
ENGLISH
.

RADIO

Search for a station
1
Press repeatedly to select RADIO.
2
Press repeatedly to select FM1/FM2/FM3/MW/LW.
3 Press S / T to search for a station.
• To change the searching method for S / T: Press
repeatedly.
AUTO1 : Automatically search for a station.
AUTO2 : Search for a preset station.
MANUAL : Manually search for a station.
• To store a station: Press and hold one of the number buttons (1 to 6).
• To select a stored station: Press one of the number buttons (1 to 6).

Other settings

1
Press the volume knob to enter [FUNCTION].
2
Turn the volume knob to select an item ( 7), then press the
knob.
3 2
Repeat step until the desired item is selected/activated or follow
the instructions stated on the selected item.
4
Press and hold to exit.
To return to the previous setting item, press .