Kenwood DPX-M3100BT Bedienungsanleitung Seite 29

TROUBLESHOOTING
Symptom Remedy
"NA FILE" Make sure the disc contains supported audio files.
( 27)
"NO DISC" Insert a playable disc into the loading slot.
"TOC ERROR" Make sure the disc is clean and inserted properly.
"PLEASE EJECT" Reset the unit. If this does not solve the problem, consult
your nearest service center.
"NO DEVICE" Connect a USB device, and change the source to USB again.
"COPY PRO" A copy-protected file is played.
"UNSUPPORTED DEVICE" • Check whether the connected device is compatible with
this unit and ensure the file systems are in supported
formats. ( 27)
• Reattach the device.
"UNRESPONSIVE DEVICE" Make sure the device is not malfunction and reattach the
device.
"USB HUB IS NOT This unit cannot support a USB device connected via a
SUPPORTED" USB hub.
• The source does not The USB port is drawing more power than the design limit.
change to "USB" when Turn the power off and unplug the USB device. Then, turn
you connect a USB on the power and reattach the USB device. If this does not
device while listening solve the problem, turn the power off and on (or reset the
to another source. unit) before replacing with another USB device.
• "USB ERROR" appears
"NO MUSIC" Connect a USB device that contains playable audio files.
• Reconnect the iPod.
"iPod ERROR"
• Reset the iPod.
Symptom Remedy
• Sound cannot be heard • Reconnect the Android device.
during playback. • If in [HAND MODE], launch any media player
• Sound output only from application on the Android device and start playback.
the Android device. • If in [HAND MODE], relaunch the current media player
application or use another media player application.
• Restart the Android device.
• If this does not solve the problem, the connected
Android device is unable to route the audio signal to
unit. ( 28)
Cannot playback at • Make sure KENWOOD MUSIC PLAY APP is installed on
[BROWSE MODE]. the Android device. ( 8)
• Reconnect the Android device and select the
appropriate control mode.
• If this does not solve the problem, the connected
Android device does not support [BROWSE MODE].
( 28)
"NO DEVICE" or "READING" • Switch off the developer options on the Android
keeps flashing. device.
• Reconnect the Android device.
• If this does not solve the problem, the connected
Android device does not support [BROWSE MODE].
( 28)
Playback is intermittent or Turn off the power saving mode on the Android device.
sound skips.
• Reconnect the Android device.
"ANDROID ERROR"/
• Restart the Android device.
"NA DEVICE"
25
ENGLISH