Herunterladen Inhalt Inhalt Diese Seite drucken

From Wheelchair To Vehicle - Autoadapt CARONY 12 Benutzerhandbuch

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 16

6. FROM WHEELCHAIR TO VEHICLE

1. PREPARE:
Open the door and turn out the
swivel base entirely.
5. SLIDE THE SEAT:
Release the seat by pressing down
the release lever.
6. REMOVE WHEEL UNIT:
Push the brake lever backwards
to release the wheel unit from the
swivel base. Pull it away and let the
user slide the legs over the u-shaped
platform. Turn the seat into the
vehicle and make sure the legs are
comfortably moved inside.
12
3. ADJUST THE HEIGHT:
Reverse the wheelchair towards
the swivel base. Adjust the height of
the chair to prepare for docking, by
turning the height adjustment handle.
Fold the height adjustment handle
back in again by fi rst pulling it out
and then folding it in.
Release
lever for seat
Slide the seat on to the swivel base
until it locks in position.
When properly locked the latches
will pop out through the holes on the
slides.
Remove the legrests.
Lift the wheel unit with bended knees,
as shown in the illustration.
Carry it close to your body.
Place the wheel unit in the luggage
area, well secured.
4. DOCK:
Dock the wheelchair to the swivel
base and check that the catch has
locked in position on both sides. Pull
the chair to check that the units have
connected properly.
Push down the brake lever to apply
the brakes.
Latch

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis