Seat Belts; Technical Data; Spare Parts - Autoadapt CARONY 12 Benutzerhandbuch

12. SEAT BELT
If the Carony wheelchair is equipped with support
belt, this may not be used as substitute for the
vehicle seatbelt.
The original seat belt of the vehicle
shall always be used!
13. TECHNICAL DATA, CARONY WITH BEV-SEAT
Seat angle
Effective depth ot seat
Maximum seat width
Effective seat width
Height of seat surface in front
Distance of seat frontedge from ground
in lowest position
Backrest inclination
Backrest height
Backrest width
Distance of headrest in front of backrest 34 mm
Height of backrest above seat
Distance of footplate to seat
Distance from footplate to ground
Length of footplate
Footplate angle
Angle of legrest to seat surface
Armrest height
Distance to backrest from front edge
of armrest
Armrest length
Armrest width
Armrest angle
Distance between armrests
Total length
Total length without legrests
Total width
Total height
Minimum folded height
Total weight
Minimum turning radius
Turnability
Weight of under-carriage
The measures are made when the Carony is in its lowest position.

14. SPARE PARTS

The Carony has a CE-poster where the serial number is stated.
Please write this number below!
The number is needed when ordering spare parts.
12˚
505 mm
477 mm
430 mm
65 mm
500 mm
-19˚ to 23˚
588 mm
425 mm
775 mm
404 mm - 550 mm in 8 steps
15 mm - 130 mm in 8 steps
129 mm
variable
104˚
285 mm
335 mm
356 mm
57 mm
-38˚ - 10˚
438 mm
1025 mm
665 mm
613 mm
1280 mm
795 mm
35,8 kg
840 mm
1130 mm
14,1 kg
Serial No: ____________________
Tyre dimensions
Rear wheel: 12½" x 2½"
Front wheel: 200 mm x 50 mm
Tyre pressure
Rear wheel: 30 psi or 2,1 bar
Front wheel: 36 psi or 2,5 bar
CE marking:
The Carony transport wheelchair
is CE marked. If the product is
altered this CE marking will not
be valid.
By any uncertainty please con-
tact Autoadapt AB for informa-
tion.
15