Herunterladen Inhalt Inhalt Diese Seite drucken

Sicherheitshinweise; Safety Notes - clage FX Gebrauchs- Und Montageanleitung

Funkfernbedienung fx für durchlauferhitzer cex, dex und dsx
Vorschau ausblenden Andere Handbücher für FX:
Inhaltsverzeichnis

Werbung

1. Sicherheitshinweise

Montage und erste Inbetriebnahme dieser Funkfern-
bedienung dürfen nur durch einen anerkannten
Fachhandwerksbetrieb erfolgen, der dabei für die
Beachtung der bestehenden Normen und Installations-
vorschriften voll verantwortlich ist. Wir übernehmen
keine Haftung für Schäden, die durch Nichtbeachtung
dieser Anleitung entstehen. Lesen Sie diese Anleitung
komplett durch, bevor Sie die Funkfernbedienung in
Betrieb nehmen.
Die Bedienung am Gerät und an der Funkfern-
bedienung sind gleichberechtigt. Die zuletzt einge-
stellte Temperatur wird vom Durchlauferhitzer ange-
wendet. Stellen Sie sicher, dass nicht ungewollt eine
zu hohe Temperatur gewählt wird. Wir empfehlen die
Funktion der Temperaturbegrenzung (siehe Anleitung
Durchlauferhitzer) zu aktivieren.
Leere Batterien können auslaufen und die Funk-
fernbedienung beschädigen. Daher sind die Batterien
bei aufleuchtendem Batteriesymbol im Display oder
fehlender Reaktion auf Tastendruck sofort zu ersetzen.
Bei längerer Nichtbenutzung der Funkfernbedienung

1. Safety notes

This remote control may only be installed and started
up for the first time by an authorized specialized com-
pany. Responsibility for compliance with the applicable
standards and installation regulations rests entirely
on the company installing the appliance. We cannot
accept any liability for damage and losses due to non-
compliance with these instructions. Read this manual
completely before starting up the remote control.
The handling of the appliance and the remote control
are equitable. The last set temperature will be used by
the instantaneous water heater. Make sure not to set
a high temperature, inadvertently. We recommend to
activate the temperature limit function (see manual of
the instantaneous water heater).
Flat batteries can leak and damage the remote control.
Hence, replace flat batteries right away as soon as
battery symbol lights up in the display or the remote
control does not response after keystroke.
When the remote control is not to be used in the long
term, remove the batteries.
Do not expose the remote control to moisture.
3

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis