Herunterladen Inhalt Inhalt Diese Seite drucken
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 43

MAIN FEATURES


3
4

AIR OUTLETS
These vents on the rear panels enable air which has
been used to cool internal components to escape. it
will not allow microwave energy to escape into the
environment. They must be kept free from obstruc-
tion.

OVEN CAVITY
The cavity is constructed from stainless steel and
vitreous enamelled panels. it must be kept clean
(see CleAninG).
3
CONVECTION FAN, GREASE FILTER & CATA-
LYTIC CONVERTOR
The convection fan, which is located behind the
catalytic convertor pulls air in through the filter
which removes the majority of the smoke from the
air flow. The air is then heated and returned to the
cavity through the impinger plates to produce an
even heat pattern in the oven. This layout minimises
areas where grease build up can occur. Great care
should be taken when cleaning this area of the oven
- please note the cleaning requirements on see
CleAninG.
The metal grease filter grill covering the fan must be
kept clean and free of debris (See CleAninG)
4
AIR INLET FILTERS ( LEFT & RIGHT )
Situated at the left and right hand side of the base
at the front. These are part of the ventilation system
and must be kept free of obstruction and cleaned on
a daily basis.
5
DOOR HANDLE
This is a rigid bar which is pulled downwards and
towards you to open.
7
6
0
5
9




3
4
6
CONTROL PANEL
See page 9.
7
ON/OFF SWITCH
When switched On, the control panel will illuminate.
The fan and ventilation system will also operate.
8
RATING PLATE
Found on the rear panel, this states the serial
number, model type & electrical specifications.
9
DOOR
This is a precision-made energy barrier with three mi-
crowave safety interlocks. it must be kept clean (see
CleAninG section). The door should nOT be used
to support heavy dishes.
0
DOOR SEALS
These ensure a tight seal around the door. They
should be kept clean and checked regularly for signs
of damage. At the first sign of wear they should be
replaced by a Merrychef approved Service Agent.

STEAM VENT (on rear of oven)
This enables steam to escape and prevents build up
of condensation. it will not allow microwave energy to
escape.

MenuKey 2
Changes the programs on the oven ( See MenuKey
section for downloading programs on a MenuKey).
3
RACK
Should be removed daily for cleaning
(see CleAninG section).
8
8
Rear view

Quicklinks ausblenden:

Werbung

Inhaltsverzeichnis
loading

Verwandte Produkte für Merrychef 402s

Inhaltsverzeichnis