Merrychef 402s Benutzerhandbuch Seite 17

MenuKey : CHANGING OVEN MENU PROGRAMS
The MenuKey System automatically changes all the cooking programs
on the oven from a pre-programmed electronic key.
To change the menus on the oven:
WARninG
Downloading from a MenuKey will clear
all the existing programs
Check that the key has the correct
number/code for the programs you want
to load into the oven memory

Ensure the power switch is OFF.
Lift the MenuKey cover in the top front panel of

the oven and put the key in the slot.
3
With the key still in place switch the power switch ON.
The oven will now go through the program download
sequence by displaying the following:
MenuKey Detected
Please Wait
The display briefly will show the following : Oven Model no., Software & MenuKey serial no.
The Oven will then commence heating up to the PReHeAT temperature ready to cook.
4 Remove the MenuKey and keep in a safe place.
Saving Programs to a MenuKey
In the CATEGORIES screen select EDIT SCREEN ( Pad name hidden) then select CREATE MENUKEY
CAT 00
CAT 00
CAT 003
CAT 004
EDIT SCREEN

enter a number for the MenuKey Code to identify
the new MenuKey, use the +/- Function Pads.
For an explanation of the following features see
Setting the Oven Profile Page 11
Set the Program Mode to ON or OFF,

Set Manual Mode to ON or OFF:
3
4 enter the lower Band temperature setting 15-75°C
5 Set the oven Temperature Scale °C
insert a MenuKey and press START to copy the programs.
The display shows the following:
Copying Programs from
Oven to MenuKey
The Display returns to the CATeGORieS screen and the Oven will heat up to the PReHeAT
temperature ready to cook.
Copying Programs from
MenuKey to Oven
CATeGORieS
CAT 005
CAT 006
CAT 007
CAT 008
Verifying Programs
Copied Correctly
Do not remove the key
during download sequence
as this could corrupt
the data on the key
Verifying Programs
Copied Correctly
eDiT CATeGORY nAMe
Program Mode : On
Cooking Range: OFF
Cooking Range: OFF
WARNING
Any programs already
on the key will be deleted
MenuKey Copied
Successfully
7
MENUKEY2
MenuKey Copied
Successfully
EDIT
eDiT A PROGRAM
CREATE MENUKEY
MENUKEY PROFILE
MenuKey Code: 000
Temperature Scale : °C
START