Spektrum SPMAR9130T PowerSafe Bedienungsanleitung Seite 3

User Guide
The Spektrum™ AR9130T, AR12300T and AR20300T PowerSafe™ telemetry
receivers offer the ultimate solution for powering high-current draw radio sys-
tems. In aircraft with multiple high-current draw servos (e.g. giant-scale aircraft,
jets, etc.), the PowerSafe receivers can provide peak current of up to 50 amps
and offers true dual battery redundancy and a fail-on soft switch for the ultimate
in reliability. By locating up to three remote receivers throughout the aircraft, the
RF link can be optimized in even the most demanding aircraft installations that
have significant conductive materials like carbon, stainless steel bypass tubes,
tuned exhausts, etc. For models high in carbon fiber content the SPM9646
DSMX Carbon Fiber Remote Receiver is compatible with these PowerSafe
®
receivers.
These telemetry receivers feature 4 integrated telemetry ports that are
compatible with Spektrum telemetry capable transmitters.
For information on Spektrum Telemetry Sensors visit:
http://www.spektrumrc.com
Applications
• Giant-scale aircraft
• Jets with multiple high-current draw servos
• Scale aircraft with multiple high-current draw servos and accessories
(e.g. lights, ESCs, air valves, etc.)
• Scale helicopters
Features
• Integrated full range telemetry
• True dual battery redundancy—each battery is isolated and if one fails/
shorts the other takes over.
• Utilizes up to three remote receivers for the ultimate RF link in even the most
demanding applications.
• Up to 35 amps continuous and 50 amps peak current handling capability
• Fail-on soft switch in case the switch is damaged
• Two types of failsafe—SmartSafe
servos)
• QuickConnect™ technology—if a power interruption (brownout) occurs, the
system
reconnects in less than 1/2 second
• Flight Log compatible
• Heavy 13AWG dual battery leads with pre-wired E-flite
• Compatible with all Spektrum
• 2048 resolution
• Compatible with X-Plus™ modules (AR20300T has the X-Plus
module built in)
IMPORTANT: The PowerSafe receiver has a power distribution center that
provides up to 35-amps continuous and 50-amps peak current to power your
system. The AR9130T, AR12300T and AR20300T PowerSafe receivers use up
to three (1 minimum connected to operate) remotely mounted receivers that can
be optimally placed in your aircraft providing the best possible RF link in the most
demanding conditions.
(throttle only) and preset failsafe (all
™
and JR full range radio and module systems
™ ®
3
EC3 connectors
® ™
EN