Spektrum SPMAR9130T PowerSafe Bedienungsanleitung Seite 106

EN
Telemetry
The Spektrum AR9140T, AR12310T and AR20310T PowerSafe telemetry
receivers features 4 integrated telemetry ports that are compatible with
Spektrum telemetry capable transmitters.
• No telemetry module required. Telemetry is built into the receiver.
• No sensor is required to receive Flight Log or receiver pack voltage
directly on any telemetry capable Spektrum transmitter.
• The PowerSafe telemetry receivers include the SPMA9570 Aircraft
Telemetry Flight Pack Voltage Sensor.
1. Plug the Aircraft Telemetry
Flight Pack Voltage Sensor into
the VOLT Telemetry Port on the
PowerSafe Receivers.
2. Splice the other end into the
flight battery pack noting
polarity.
For information on Spektrum Telemetry Sensors visit:
http://www.spektrumrc.com
Dual Battery Capacity Monitoring
The PowerSafe receivers feature dual battery capacity monitoring through
telemetry when used with Spektrum AirWare G2 transmitters. The capacity
is automatic and is simply activated in the transmitter using the Auto Config
function. The capacity used is stored flight to flight and adds until reset. The
capacity can be reset when the battery is charged, allowing easy battery
capacity monitoring.
To reset the capacity used:
1. Power on the transmitter and receiver and allow the receiver to connect to
the transmitter.
2. Once connected to the transmitter, either press the bind button or connect
a bind plug to the bind port.
3. Capacity used will now be reset.
NOTICE: The capacity will only reset if the transmitter and receiver are
connected before pressing the Bind button or connecting a bind plug. If the
receiver is not connected, capacity used will not be reset, and the receiver
will either enter bind mode or do nothing if the receiver is powered on but
not connected.
18