Technical Properties - switel DF851 Colombo Bedienungsanleitung

Technical Properties

No telephone calls possible
The caller number display (CLIP
does not function
13 Technical Properties
Technical data
Feature
Standard
Power supply (base station)
Power supply (charging station)
Range
Standby time
Max. talk time
Rechargeable batteries
Dialling mode
Permissible ambient temperature
Permissible relative humidity
Flash function
1
DECT: Digital Enhanced Cordless Telecommunication = Standard for cordless telephones.
2
GAP: Generic Access Profile = Standard for the interoperation of handsets and base sta-
tions from different manufacturers.
3
CLIP: Calling Line Identification Presentation = Display the caller's phone number.
78
− The telephone is not connected properly or is de-
fective. Only use the telephone connection cable
supplied.
− Test whether the telephone connection is in order
by using another telephone.
− The power adaptor plug is not plugged in or there is
a complete power failure.
− The rechargeable batteries are empty or defective.
− The handset is too far from the base station.
− Dialling mode is set incorrectly . Page 74.
3
− The caller number display (CLIP) is a supplemen-
)
tary service offered by your telephone network pro-
vider. Contact your network provider for further in-
formation.
− The caller has suppressed the transmission of their
phone number.
Value
1
DECT
Input: 100−240 V AC, 50/60 Hz
Output: 7.5 V DC, 300 mA
Input: 100−240 V AC, 50/60 Hz
Output: 7.5 V DC, 200 mA
Outdoors: Approx. 300 m
Indoors: Approx. 50 m
Up to 100 h
Up to 10 h
2 x AAA NiMH 1.2 V
Tone dialling mode
Pulse dialling mode
10°C to 30°C
20% to 75%
100 ms, 250 ms, 600 ms
2
−GAP