Herunterladen Inhalt Inhalt Diese Seite drucken

Important Safety Information; Key To Symbols - Epson TM-J7000 Bedienungsanleitung

Vorschau ausblenden Andere Handbücher für TM-J7000:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 21
English
EMC and Safety Standards Applied
Product Name: TM-J7000/TM-J7100
Model Name:
M184A
The following standards are applied only to the
printers that are so labeled. (EMC is tested using
the EPSON power supplies.)
Europe:
CE marking
Safety: TÜV (EN 60950)
North America: EMI:
Safety: UL 60950/CSA C22.2
Japan:
EMI:
Oceania:
EMC: AS/NZS 3548 Class B
WARNING
The connection of a non-shielded printer
interface cable to this printer will invalidate the
EMC standards of this device.
You are cautioned that changes or modifications
not expressly approved by Seiko Epson
Corporation could void your authority to
operate the equipment.
CE Marking
The printer conforms to the following Directives
and Norms:
Directive 89/336/EEC

Important Safety Information

This section presents important information intended to ensure
safe and effective use of this product. Read this section carefully
and store it in an accessible location.

Key to Symbols

The symbols in this manual are identified by their level of
importance, as defined below. Read the following carefully before
handling the product.
WARNING:
Warnings must be followed carefully to avoid serious bodily injury.
2 TM-J7000/J7100 User's Manual
FCC/ICES-003 Class A
No. 60950
VCCI Class A
EN 55022 Class B
EN 55024
IEC 61000-4-2
IEC 61000-4-3
IEC 61000-4-4
IEC 61000-4-5
IEC 61000-4-6
IEC 61000-4-8
IEC 61000-4-11
FCC Compliance Statement
For American Users
This equipment has been tested and found to
comply with the limits for a Class A digital
device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable
protection against harmful interference when
the equipment is operated in a commercial
environment.
This equipment generates, uses, and can radiate
radio frequency energy and, if not installed and
used in accordance with the instruction manual,
may cause harmful interference to radio
communications.
Operation of this equipment in a residential area
is likely to cause harmful interference, in which
case the user will be required to correct the
interference at his own expense.
FOR CANADIAN USERS
This Class A digital apparatus complies with
Canadian ICES-003.

Quicklinks ausblenden:

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

Tm-j7100

Inhaltsverzeichnis