Important Safety Information; Key To Symbols; Safety Precautions - Epson TM-H6000III Bedienungsanleitung

English

Important Safety Information

This section presents important
information intended to ensure safe and
effective use of this product. Read this
section carefully and store it in an
accessible location.

Key to Symbols

The symbols in this manual are identified
by their level of importance, as defined
below. Read the following carefully before
handling the product.
WARNING:
Warnings must be followed carefully to
avoid serious bodily injury.
CAUTION:
Cautions must be observed to avoid
minor injury to yourself, damage to your
equipment, or loss of data.

Safety Precautions

WARNING:
Shut down your equipment immediately if
it produces smoke, a strange odor, or
unusual noise. Continued use may lead to
fire. Immediately unplug the equipment
and contact your dealer or a Seiko Epson
service center for advice.
Never attempt to repair this product
yourself. Improper repair work can be
dangerous.
Never disassemble or modify this
product. Tampering with this product
may result in injury or fire.
Be sure to use the specified power
source. Connection to an improper
power source may cause fire.
Do not allow foreign matter to fall into
the equipment. Penetration by foreign
objects may lead to fire.
If water or other liquid spills into this
equipment, unplug the AC cable
immediately, and then contact your
dealer or a Seiko Epson service center for
advice. Continued usage may lead to
fire.
2 TM-H6000III User's Manual
Do not use aerosol sprayers containing
flammable gas inside or around this
product. Doing so may cause fire.
CAUTION:
Do not connect cables in ways other
than those mentioned in this manual.
Different connections may cause
equipment damage and burning.
Be sure to set this equipment on a firm,
stable, horizontal surface. Product may
break or cause injury if it falls.
Do not use in locations subject to high
humidity or dust levels. Excessive humidity
and dust may cause equipment
damage or fire.
Do not place heavy objects on top of
this product. Never stand or lean on this
product. Equipment may fall or collapse,
causing breakage and possible injury.
Take care not to injure your fingers on the
manual cutter
• When you remove printed paper
• When you perform other operations
such as loading/replacing roll paper
To ensure safety, unplug this product before
leaving it unused for an extended period.
Do not touch the thermal head or paper
feed motor. Wait for the head and the
motor to be cool. The head and the
motor can be very hot after printing for a
long time. Touching them may cause
burns.
Labels
The caution labels on the product indicate
the following precautions.
WARNING:
Do not connect a telephone line to the
drawer kick-out connector or the display
module connector; otherwise the printer
and the telephone line may be damaged.
CAUTION:
Thermal head and paper feed motor for
the thermal section are hot.
CAUTION:
Caution label for autocutter blade.