Projecting; Connecting The Projector; Connecting With A Computer - Sony VPL-FX52 Kurzreferenz

Projecting

Connecting the Projector

When you connect the projector, make sure to:
• Turn off all equipment before making any connections.
• Use the proper cables for each connection.
• Insert the cable plugs firmly. When pulling out a cable, be sure to pull it out from the
plug, not the cable itself.
Refer also to the instruction manual of the equipment to be connected.

Connecting with a computer

For video signal connections, the following two connecting options are available:
1 HD D-sub 15 pin cable (not supplied)
2 HD D-sub 15-pinyBNC cable (not supplied)
INPUT A
RGB
NEW
INPUT C
R/R-Y/P G/Y B/B-Y/P SYNC/HD VD
R B
5
GB
Projecting