Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
INTRODUCTION
RESET
CHANGING CAPITALS AND LOWER CASE
Thank you for purchasing this NTL1560 15-language translator. This product has been designed to help you
translate words in English, French, German, Spanish, Italian, Portuguese, Polish, Dutch, Finnish, Norwegian,
Danish, Swedish, Greek, Hungarian and Turkish.
The database includes 5000 words for each language, as well as 150 conversational phrases per language,
which have been grouped into 10 different categories for easy access and use. Under normal use the NTL1560
is designed to give many years of service. Please follow these instructions carefully to ensure your product operates
correctly.
Removing the battery tab
Before you start using the unit, carefully remove the battery tab located at the rear of the unit:
1. Unscrew and remove the battery compartment lid on the back of the unit.
2. Take note of the correct polarity (+/- signs), and remove the battery.
. Remove the battery tab, and replace the battery according to the polarity.
Reset the unit before using it for the first time:
- Press the reset button on the back of the unit with a small thin object i.e. the end of a paper clip. "RESET?" will be
displayed onscreen.
- Press ENTER to confirm.
Notes:
- If a function key is pressed, reset will be cancelled, and the function will be activated.
- Press any other key to exit the reset mode, and enter Home Time mode.
Opening and closing the unit
To open the unit, press the front centre button to release the catch.
To close it, gently push the lid down.
Before switching the unit on, make sure you remove the clear film label from the LCD screen by pulling the tab.
Press SHIFT +
(MENU) to enter the system settings mode. Use
1. KEY TONE: Press ENTER for key tone settings. The default key tone status is on, press
and off. Press ENTER to confirm.
2. AUTO OFF: Press ENTER for auto off time settings. The default auto off time is 5 minutes, press
scroll through the following selection: 3 MINUTES, 5 MINUTES and 7 MINUTES. Press ENTER to confirm.
3. PASSWORD: Press ENTER to access this function. For more details, please refer to the section SECRET
MEMORY.
4. CONTRAST: Press ENTER for contrast settings. The default contrast is 6. Press
Press ENTER to confirm.
NTL1560IM0497.indb 3
SUMMARY
3
3
3
3
4
4
4
4
5
6
7
INTRODUCTION
GETTING STARTED
RESET
SYSTEM SETTING
and
to scroll through the following settings:
8
8
9
9
10
10
12
13
13
14
14
or
to turn it on
or
to
or
to scroll from 1 to 8.
2/1/08 19:09:42
Werbung
Kapitel
Inhaltsverzeichnis
