For Your Safety; Intended Use; General Safety Notes - turck NIC...-M30 Betriebsanleitung

2.4 Manufacturer And Service
With almost 50 years of experience and an extensive know-how, we can support you in every project phase – from
the initial analysis right through to the tailored implementation and commissioning of your application. In the
TURCK product database you will find the right solution, whether this involves software tools for programming,
configuration or commissioning support, detailed data sheets or CAD data in almost 80 export formats – acces-
sible worldwide, in nine different languages, free of charge and without registration. You can access the Product
Database via the following address:
For further inquiries in Germany contact the Sales and Service Team on:
■
Sales: +49 (0) 208 4952-380
■
Technical: +49 (0) 208 4952-390
Outside Germany, please contact your national TURCK representative.
Hans Turck GmbH & Co. KG
45466 Mülheim an der Ruhr
Germany
3

For Your Safety

The product is designed according to the latest state of the art technology. Residual hazards, however, still exist.
Observe the following safety instructions in order to avoid hazards. TURCK accepts no liability for damage caused
by failure to observe these safety instructions.
3.1

Intended Use

Inductive couplers are used for the contactless and bidirectional transfer of power and data via an air interface
(max. 7 mm) in industrial automation applications. The devices consist of a primary side and a secondary side. The
primary side supplies power to the secondary side via an air interface. The secondary side supplies in turn data
from the connected sensors as well as sensors and actuators connected in IO-Link mode.
The product must only be fitted, installed, operated and maintained by trained and qualified personnel. The ma-
chine designer, supervising engineer, machine builder and/or the maintenance electrician are responsible for en-
suring that the product is used in full compliance with all applicable regulations and standards.
3.2 Safety Instructions For Inductive Couplers
WarnIng
Possible risk of heating the devices
Risk of burns through contact with hot surfaces of the device!
Do not place any metal objects such as screw drivers in the electrical field between the primary and secondary
➤ ➤
side.
3.3

General Safety Notes

Observe the following safety instructions in order to prevent danger to persons and property:
WarnIng
The devices are not safety devices and must not be used for people or machine protection.
more@turck.com • www.turck.com • 2015/04
www.turck.de/produkte
For Your Safety
7