Target Groups; Explanation Of Symbols - turck NIC...-M30 Betriebsanleitung

1 About This Manual
This manual describes the setup, the functions and use of the product and helps you to operate the product for
its intended use. Read these instructions carefully prior to using the product. This will prevent the risk of personal
injury and damage to property. Keep these instructions safely during the service life of the product. If the product
is passed on, pass on these instructions as well.
TURCK accepts no liability for damage caused by failure to observe these instructions.
If you require further information or have questions about the device, contact the TURCK Service or visit our web-
site.
1.1

Target Groups

These instructions must be read and followed by anyone entrusted with any of the following tasks:
■
Unloading and in-house transport
■
Unpacking and mounting
■
Commissioning
■
Setting
■
Testing and maintenance
■
Troubleshooting
■
Disassembly and disposal
1.2

Explanation Of Symbols

The following symbols are used in these instructions:
WarnIng
WARNING indicates a possible hazardous situation with the risk of death or serious injury if it is not prevented.
aTTEnTIOn
ATTENTION indicates a situation that may cause possible damage to property if it is not prevented.
nOTE
NOTE indicates tips, recommendations and important information. The notes contain information, particular op-
erating steps that facilitate work and possibly help to avoid additional work resulting from incorrect procedures.
ManDaTOrY aCTIOn
➤
This symbol denotes actions that the user must carry out.
rESuLT OF aCTIOn
➥
This symbol denotes the relevant results of actions and procedures.
1.3 Feedback About These Instructions
We make every effort to ensure that these instructions are as informative and as clear as possible. If you have any
suggestions for improving the design or if some information is missing in the document, please send your sug-
gestions to techdoc@turck.com.
more@turck.com • www.turck.com • 2015/04
About This Manual
5