dallmeier DVS 600 Bedienungsanleitung Seite 42

Digital HD Recorder DVS 600
Fig. 08
In addition the point of the first detection is shown in the form of a
small square. A line from this point shows the movement of the
object afterwards.
Display with object features analysis
If the object features analysis has been activated (SenViCon
„Processing" tab) the current analysis result can be read off the
display of the object trajectory.
The colors have the following meanings:
A message/alarm is triggered if the object border and the object
trajectory are both white.
In addition small crosses will be displayed on the outside of all four
corners of the border or rectangle. These allow a conclusion to be
drawn to certain criteria that must be satisfied for the alarm to be
triggered. If no crosses are displayed, this criterion is not satisfied.
42
Black trajectory
One or more criteria (conditions) of the object features analysis
for triggering are (currently) not satisfied.
White trajectory
All the criteria of the object features analysis for triggering are
(currently) satisfied.
Dallmeier electronic GmbH & Co.KG