Special Methods; User Defined Methods - MACHEREY-NAGEL PF-12 Plus Handbuch

7. Special methods

7.1 User defined methods

Plus
The PF-12 allows the user to program up to 50 user-defined methods. These methods
can be defined as linear (with one factor) or non-linear (functions up to the fourth degree +
Ln-functions). For these methods all options as for the pre-programmed methods are avail-
able, e.g. location, date, dilution, data storage.
03.06.2014 Ä
Method
M: 508
^_
03.06.2014 Ä
User method: P16
Create method?
By selection of a method number which does not exist, the instrument opens the window
"Create method?". After confirming with
characteristics of the new method. Enter texts, filter, factor, decimals, measurement range,
entity and additional dimension via keypad.
Enter the factors (F0 to F4, FLn) according to the formula y = F0 + F1xE
4
F4xE + FLnxLnE. By pressing
Changes made in error can be changed at any time using
any time by pressing
If the selected method already exists, different options are possible which can be selected
via / :
03.06.2014 Ä
User method: P01
Execute method?
^_
03.06.2014 Ä
User method: P01
Edit method?
^_
03.06.2014 Ä
User method: P01
Delete method?
^_
Select
09:30
Press
selection menu.
Create
09:30
With
method doesn´t exist yet, confirm with
OK
prior input of the factor the prefix is changed.
.
Execute
09:30
Press
OK
Edit
09:30
Select the option "Edit method?" by pressing
firm with
OK
Delete
09:30
Select the option "Delete method?" by pressing
confirm with
check.
OK
09.12.2014
to enter the special method menu from the method
and for example 16 method P16 is selected. If this
the instrument asks for the menu-guided input of
to execute the selected method.
to edit entries menu-guided.
to delete a method after an additional security
to create it.
1 + F2xE
/ . The menu can be left at
/
2 + F3xE 3 +
and con-
/ and
43