Performance Of Nanocolor ® Tube Tests - MACHEREY-NAGEL PF-12 Plus Handbuch

03.06.2014
5081 AMMONIUM 3
^_ äåèò
For the detailed procedure of the individual tests please follow the corresponding in-
struction leaflet. You can find detailed descriptions and pictograms on our homepage
www.mn-net.com/PF-12Plus, and on the software DVD.
5.4 Performance of NANOCOLOR
The characteristics of all our NANOCOLOR
measurement of a blank value is only neccessary for a few tests.
03.06.2014
Method
M: 029
^_
Method:
Settings
Basic functions
- Tube tests
VISOCOLOR-ECO
^_
03.06.2014
0091 LEAD 5
^_ äè
Change of the submethod
A submethod change (e.g. for determination of the result in another unit) can be done by
pressing the buttons
active submethod is indicated by the underlined number in the taskbar. After choice of the
desired submethod, the measurement range of the submethod will be displayed briefly. After
change of the submethod, please perform the measurement again to display the result. For
some tests only one submethod is programmed.
For the detailed procedure of the individual tests please follow the corresponding in-
struction leaflet. You can find detailed descriptions and pictograms on our homepage
www.mn-net.com/PF-12Plus, and on the software DVD.
40
Perform a measurement
09:30
Insert the clean round tube with the measurement solution into
the photometer and press
Z M
Switch on the photometer
09:30
The display "Method _ _ _" appears.
A NANOCOLOR
test number (0 - xx)
or
by pressing
Perform a zero measurement (for few tests)
09:30
Insert the clean round tube with the blank value into the pho-
tometer and press
value.
Z
Perform a measurement
Insert the clean round tube with the measurement solution into
the photometer and press
/ in the measurement menu of the chosen test. The currently
09.12.2014
. Read the result.
® tube tests
® tube tests are stored in the PF-12
® tube test can be called up by entering the
/ via the list.
. Remove the round tube with the blank
. Read the result.
Plus . The