Environmental Protection; Safety Instructions; Preparing For Start-Up - Kärcher FR Classic Bedienungsanleitung

Please read and comply with
these original instructions prior
to the initial operation of your appliance and
store them for later use or subsequent own-
ers.

Environmental protection

The packaging material can be recy-
cled. Please do not place the packag-
ing into the ordinary refuse for disposal, but
arrange for the proper recycling.
Old appliances contain valuable ma-
terials that can be recycled. Please
arrange for the proper recycling of old
appliances. Please dispose your old appli-
ances using appropriate collection sys-
tems.
Notes about the ingredients (REACH)
You will find current information about the
ingredients at:
www.kaercher.com/REACH
Symbols in the operating
instructions
Danger
Immediate danger that can cause severe
injury or even death.
Warning
Possible hazardous situation that could
lead to severe injury or even death.
Caution
Possible hazardous situation that could
lead to mild injury to persons or damage to
property.
Use as intended
The FR Classic, in combination with a high
pressure cleaner, is suitable for cleaning
floors and walls.
Maximum water pressure 16 MPa (160 bar).
Maximum water temperature 40 °C.
Performance values are listed in the Spec-
ifications in the Operating Instructions and
on the type plate of the high pressure
cleaner.

Safety instructions

Danger!
Risk of injury due to defective appliance.
Check the faultless condition of the appli-
ance before using it. The appliance is not
fit for use if it is not in a faultless condition.
The appliance may not be modified.
Danger!
Risk of injury due to rotation arm. Never
touch below the appliance when the high
pressure cleaner is on.
The rotation arm continues to rotate for a
while even after the high pressure cleaner
has been switched off. Wait for the rotation
arm to stop before starting any work on the
appliance.
High-pressure jets can be dangerous if im-
properly used. The jet must not be directed
at persons, animals, live electrical equip-
ment or at the appliance itself.

Preparing for start-up

Selecting the high-pressure nozzles
You need to use the matching high-pres-
sure nozzles to ensure that your high-pres-
sure cleaner works properly.
Note: Water volume (l/h): See Operating
Instructions or type plate of your high-pres-
sure cleaner.
High pressure cleaner with water
volumes up to 500 l/h
 Use the high pressure nozzle 017.
High pressure cleaner with water
volumes up to 600 l/h
 Use the high pressure nozzle 020.
– 1
EN 5