Description Of The Appliance; Insert The Battery - Kärcher EB 30/1 Bedienungsanleitung

– Avoid contact with liquids oozing out of
defective battery packs. Rinse thor-
oughly if you accidentally come in con-
tact with the fluid. Also consult a doctor
if the fluid comes in contact with your
eyes.
Symbols on the machine
– Protect the charger against moisture;
store it dry. The appliance is suitable
for use only in rooms; do not expose the
appliance to rain.
Start up

Description of the Appliance

When unpacking the product, make sure
that no accessories are missing and that
none of the package contents have been
damaged. If you detect any transport dam-
ages please contact your dealer.
Note: Please refer to page 2 for figures of
the appliance and the operation.
1 Cardan joint with lock
2 ON/OFF foot switch
3 Rechargeable battery, detachable
4 Spare battery
(nur EB 30/1 Professional)
5 Unlocking button, battery
6 Dirt container, detachable
7 Unlocking mechanism for dirt container
8 Casing
9 Brush roller, changeable
10 Unlocking button for brush roller
11 Telescopic strut, adjustable height
12 Turning handle for height adjustment
13 Handle
14 Charger with charging status display
and charging cable
(only EB 30/1)
15 Quick charger
(nur EB 30/1 Professional)
8
English
Installing the telescopic handle and
the handle and adjusting the height
see Figure 2
The telescopic strut consists of 3 parts.
While assembling it, make sure that the
parts lock into each other.
Insert the handle on the longer strut
with turning handle.
Insert together the longer and shorter
struts; while assembling it, press the
locking button.
Insert the entire strut with the locking
button into the joint on the appliance.
Loosen the handle and pull out the strut
to the desired working height; turn the
handle to the correct position and tight-
en using the turning handle.
Charge the battery
see Figure 3
The battery is not charged at the time of de-
livery. Charge it before commissioning the
appliance and then as and when required.
Note
The battery can be charged only when it is
removed out of the appliance.
Connect the battery to the charger us-
ing the charging cable or rather insert
the battery in the charger.
Insert the charger delivered with the ap-
pliance into a proper socket.
The charger display glows red. The battery
is being charged.
Charging current for empty battery
Charger BC 1/0.1
Quick Charger BC 1/1.8
Note
If the charging time is exceeded, the charg-
er shifts to retention charging. The charger
display continues to glow red.

Insert the battery

see Figure 4
Insert the battery into the intake and
lock it.
12 h
50 min