Troubleshooting - Philips HD5730 Handbuch

Message Meaning
GENERIC ALARM! The inside of the appliance is
very dirty.
INSERT WATER The hot water spout is not
SPOUT! inserted.
NO MILK JUG! The milk jug is not inserted.
Problem
The display does not
work.
The text on the
display is in the
wrong language.
The coffee is not
hot enough.
The coffee is not
creamy enough.
The coffee flows out
of the spout too
slowly.

troubleshooting

If you are unable to solve the problem with the information below, contact
the Customer Care Centre in your country (see chapter 'Guarantee and
service').
Possible cause
You have not removed the
sticker from the display.
You have set the wrong
language.
The cups have not been
preheated.
The coffee temperature is
set too low in the menu.
The coffee is ground too
coarsely.
You have used a wrong type
of coffee.
The coffee is ground too
finely.
What to do
Switch off the appliance and clean the inside of
the appliance thoroughly, as described in chapter
'Cleaning'. If the message is still displayed after
you have cleaned the appliance, contact an
authorised Philips service centre.
Place the hot water spout in the appliance.
Place the milk jug in the appliance.
Solution
Remove the sticker from the display.
If you set the wrong language during the initial
installation procedure, you first have to complete
the installation procedure before the language
can be changed. Consult the Quick Start Guide
guide or the user manual on how to complete
the installation procedure. The installation is
complete when the appliance switches off
automatically. To select another language: (1) Press
the on/off button to switch on the appliance. (2)
Press the MENU button. (3) Press the % button
twice. (4) Press the OK button. (4) Select the
preferred language with the % and ^ buttons.
(5) Press the OK button.
To preheat the cups, rinse them with hot water
or leave them on the cup warmer tray on top of
the switched-on appliance for at least 20 minutes.
Increase the coffee temperature in the menu
(see chapter 'Setting menu parameters).
Turn the grinding adjustment knob one setting
anticlockwise.
Use a type of coffee suitable for espresso coffee
makers.
Turn the grinding adjustment knob one setting
clockwise.
EnglisH
9