Changing The Quantity Of Hot Water; Adjusting The Coffee Mill - Philips HD5730 Handbuch

 Press the button for hot water.
The display reads 'HOT WATER' and 15ml of hot water comes out
,
of the hot water spout.
Do not use the hot water function for more than  minutes at a time.

changing the quantity of hot water

The appliance is preset to produce 125ml hot water. You can change this
quantity as follows:
1 Attach the hot water spout to the nozzle.
 Place a cup under the spout.
 Press the button for hot water until the message 'PROGRAM TO
SET VOL - HOT WATER' appears on the display and then release it.
Hot water comes out of the hot water spout.
,
 When the water in the cup reaches the required level, press
the button for hot water again to set the new quantity.
'SETTING DONE' appears on the display. The appliance now
,
produces the set quantity until you change it again.

adjusting the coffee mill

The coffee grinder is preset to the correct coarseness and should not
require frequent adjustment. You can select a coarser setting for less foam,
a normal aroma and faster brewing. You can select a finer setting for more
foam, a more intense aroma and slower brewing.
Only turn the grinding coarseness knob when the coffee mill is grinding.
EnglisH
1