Philips HD5730 Handbuch Seite 28

EnglisH
8
Message
GROUND TOO
FINE! Adjust mill
- INSERT WATER
SPOUT - Press
hot water
INSERT WASTE
BIN
NO GROUND
COFFEE! -Fill
container-
NO COFFEE
BEANS! -Fill
container-
LESS GROUND
COFFEE!
PLEASE
DESCALE!
CLOSE DOOR!
INSERT
BREWING UNIT!
Meaning
The water tank is dirty or
scale has deposited in the
water tank.
The appliance cannot brew
coffee.
The coffee is brewed too
slowly.
After cleaning, the waste bin
has not been reinserted into
the appliance.
You have selected the ground
coffee function but you have
not put ground coffee in the
appliance.
The coffee beans have run out.
If the coffee grinder is very
noisy, this means a small stone
in the coffee beans has blocked
the mill.
The ground coffee funnel is
clogged.
You have put too much ground
coffee in the appliance.
This indicates the presence
of scale in the appliance.
The service door is open.
You have probably not
reinserted the brewing unit
after you cleaned it.
What to do
Rinse or descale the water tank.
Insert the hot water spout, press the button and
let water run out of the spout for a few seconds.
Turn the grinding coarseness knob clockwise
one setting (see section 'Regulating the coffee
mill' in chapter 'Using the espresso maker').
Open the service door and insert the waste bin.
Add ground coffee (see section 'Brewing
espresso from ground coffee' in chapter 'Using
the espresso maker').
Fill the coffee bean container.
Contact an authorised Philips service centre.
Switch off the appliance and empty the funnel
with the handle of a spoon. Be careful not to
damage the funnel.
Reduce the quantity of ground coffee. Then brew
coffee again.
Perform the descaling procedure as soon as
possible (see section 'Descaling' in chapter
'Setting menu parameters').
Close the service door. If the service door
cannot be closed, make sure that the brewing
unit is inserted correctly (see section 'Cleaning
the brewing unit' in chapter 'Cleaning').
Insert the brewing unit (see section 'Cleaning the
brewing unit' in chapter 'Cleaning').