Automatic Heat Up; Power Boost - AEG HKH81700FB Benutzerhandbuch

10 www.aeg.com
0
For flexible induction
cooking zone first place the
cookware. When the
cookware is detected the
symbol of the zone appears.
4.9 Flexible induction cooking
zone
The flexible induction cooking zone
detects the position and size of the
cookware. When the cookware is
detected the symbol of the zone
appears. You can activate the cooking
zone panel and set the heat setting or
timer functions. The size of the cooking
zone symbol depends on the size of the
cookware. If the symbol is small you can
place additional cookware next to the
one you use.
You can use up to three pots on the zone
and operate them separately. The
minimum size of the cookware is 90mm.
The maximum is 300 x 460 mm.
When you remove the cookware from
the zone the symbol of the zone turns
gray. After 10 seconds the zone
disappears.
4.10 Split function
If you use a large cookware on the
flexible zone you can divide it into two
cooking zones. This will let you set two
different heating levels for two different
areas of the cookware.
To activate the function: touch the zone
symbol. Cooking zone panel comes on.
Touch and choose the function from
the list. If the function is not available in
submenu the zone is to small to be split.
To deactivate the function: touch the
zone symbol. Cooking zone panel comes
9
on. Touch
unsplit the zone.
If you remove cookware for
more than 10 seconds or you
deactivate the zone, the
function deactivates.
To split or unsplit the zone
14
you can also touch the zone
symbol with two fingers.

4.11 Automatic Heat Up

If you activate this function you can get a
necessary heat setting in a shorter time.
The function sets the highest heat setting
for some time and then decreases to the
correct heat setting.
To activate the function for a cooking
zone: touch the cooking zone symbol.
Set the desired heat setting between 1
and 13. Touch
function comes on inside the cooking
zone symbol:
symbol counts down the remaining
function time.
If you change the heating
level while the function
operates, the timer counts
down a new time specific for
this heating level.
To deactivate the function: touch
. When the function operates you
can also deactivate it by changing the
heat setting.

4.12 Power Boost

This function makes more power
available to the induction cooking zones.
The function can be activated for the
induction cooking zone only for a limited
period of time. After this time the
induction cooking zone automatically
sets back to the highest heat setting.
Refer to "Technical
information" chapter.
To activate the function for a cooking
zone: touch the cooking zone symbol.
Set the heat setting 0 or 14. Touch
and choose the option to
. A symbol of the
. The timer next to the