AEG HKH81700FB Benutzerhandbuch Seite 17

Problem
Heat settings for the pots on
flexible zone are reduced.
comes on.
Pro Cook function deacti-
vates.
The display brightness is re-
duced.
The display does not react
to the touch.
The power level is reduced.
The arrow pointing down
comes on in the cooking
zone symbol.
The backlight is on, but the
contrast of the display is
bad.
There is no signal when you
touch the panel sensor
fields.
E and a number come on.
E3 comes on.
Possible cause
You are using to many pots
with the highest heat setting
on the flexible zone. Power
management function is acti-
vated.
One of the Lock functions is
active.
You are using more than one
pot.
The temperature of the
zones is high. To ensure
long lifetime of the display
the brightness is reduced
depending on the tempera-
ture of the hob.
Part of the display is covered
or the pots are placed to
near to the display.
Power management function
operates.
The hot cookware is on the
display.
The signals are deactivated.
There is an error in the hob.
The electrical connection is
incorrect. The supply voltage
is out of range.
ENGLISH
Remedy
Move some pots to induc-
tion cooking zones.
To unlock the hob touch let-
ters in alphabetical order A -
O - X.
Use only one pot for the
function.
Let the hob cool down.
Remove the objects. Move
the pots away from the dis-
play.
Refer to "Daily use" chapter.
Remove the object and let
the hob become sufficiently
cool. If the contrast is not
clear, speak to an Author-
ised Service Centre.
Activate the signals.
Refer to "Daily use" chapter.
Disconnect the hob from the
electrical supply for some
time. Disconnect the fuse
from the electrical system of
the house. Connect it again.
If E comes on again, speak
to an Authorised Service
Centre.
Speak to a qualified electri-
cian to check the installation.
17