Automatic Heat Up - AEG HK654070FB Benutzerinformation

Use sensor field:
To activate the outer ring: touch the sensor
field. The indicator comes on.
To activate more outer rings: touch the
same sensor field again. The subsequent
indicator comes on.
To deactivate the outer ring: touch the
sensor field until the indicator goes out.
When you activate the zone but
do not activate the outer ring the
light that comes out from the
zone may cover the outer ring. It
does not mean that the outer
ring is activated. To see if the
ring is activated check the
indicator.

5.5 Automatic Heat Up

Activate this function to get a desired heat
setting in a shorter time. When it is on, the
zone operates on the highest setting in the
beginning and then continues to cook at the
desired heating setting.
To activate the function the
cooking zone must be cold.
To activate the function for a cooking
zone: touch (
touch a desired heat setting. After 3 seconds
comes on.
To deactivate the function: change the
heat setting.
5.6 Timer
• Count Down Timer
You can use this function to set the length of
a single cooking session.
First set the heat setting for the cooking
zone, then set the function.
To set the cooking zone: touch
repeatedly until the indicator of a cooking
zone appears.
To activate the function: touch
timer to set the time (00 - 99 minutes). When
comes on). Immediately
of the
the indicator of the cooking zone starts to
flash, the time counts down.
To see the remaining time: touch
the cooking zone. The indicator of the
cooking zone starts to flash. The display
shows the remaining time.
To change the time: touch
cooking zone. Touch
To deactivate the function: touch
the cooking zone and then touch
remaining time counts down to 00. The
indicator of the cooking zone disappears.
When the countdown ends, an
acoustic signal sounds and 00
flashes. The cooking zone
deactivates.
To stop the sound: touch
• CountUp Timer
You can use this function to monitor how
long the cooking zone operates.
To set the cooking zone: touch
repeatedly until the indicator of a cooking
zone appears.
To activate the function: touch
timer. appears. When the indicator of the
cooking zone starts to flash, the time counts
up. The display switches between
counted time (in minutes).
To see how long the cooking zone
operates: touch
The indicator of the cooking zone starts to
flash. The display shows how long the zone
operates.
To deactivate the function: touch
then touch or
cooking zone disappears.
• Minute Minder
You can use this function when the hob is
activated and the cooking zones do not
operate. The heat setting display shows
to set
to set the
or .
to set
. The
.
of the
and the
to set the cooking zone.
and
. The indicator of the
ENGLISH
.
27