Shortcuts; Power Management Function - AEG HKH81700FB Benutzerhandbuch

Child Lock function prevents accidental
activation and operation of the hob when
it is deactivated.
To activate or deactivate the functions:
touch and choose Menu than touch
Safety. On the next screen choose if you
want to turn the functions on or off.
Confirm your selection.
To operate the hob without
deactivating the function
follow the information on the
display and touch the letters
in alphabetical order: A - O -
X.

4.17 Shortcuts

You can set the functions that you use
often as shortcuts. Shortcuts will be
displayed as symbols on the status bar in
the control panel screen. Shortcuts allow
you to activate the function with one
touch.
To activate the shortcuts: touch
choose Menu than touch the shortcuts
menu. On the next screen choose the
functions you want to display as
shortcuts on the status bar. Confirm your
selection.
4.18 Display
You can choose one of the four
brightness levels of the display. 1 is the
lowest and 4 is the highest level of
brightness.
To change the brightness settings:
touch and choose Menu than touch
the display menu. On the next screen
choose the desired setting. Confirm your
selection.
4.19 Sounds
You can choose the type of sounds you
want to hear when operating the hob.
You can also deactivate the sounds.
To change the sounds settings: touch
and choose Menu than touch the
sounds menu. On the next screen
choose the desired setting. Confirm your
selection.
When the sounds are off you
can still hear the sound when
timer comes to an end or
when you deactivate the
hob.
4.20 Power management
function
• Cooking zones are grouped
according to the location and number
of the phases in the hob. See the
illustration.
• Each phase has a maximum electricity
loading of 3700 W.
• The function divides the power
between cooking zones connected to
the same phase.
• The function activates when the total
electricity loading of the cooking
zones connected to a single phase
exceeds 3700 W.
• The function decreases the power to
the other cooking zones connected to
the same phase.
and
• The heat setting of the reduced zones
changes between two levels.
• For the flexible zone you can use up
to three pots. If the maximum loading
for the phase is exceeded the
function activates. The activation of
the function depends on the
cookware size and number. The
function decreases the heat setting
for the pots to the highest possible on
the phase. The cooking zone symbol
turns gray and the heat setting
changes between two levels. The
arrow pointing down comes on in the
cooking zone symbol. If you do not
change the pots number on the
flexible zone after one minute the
lower heat setting will be set for this
cooking session.
ENGLISH 13