AEG HKH81700FB Benutzerhandbuch Seite 11

. comes on inside the cooking
zone symbol. The timer next to the
symbol counts down the remaining
Power Boost time.
To deactivate the function: touch
.
The Power Boost times and
the power on flexible
induction cooking zone
depend on cookware size.
The function works for
cookware larger then 180
mm.
4.13
Pro Cook function
This function allows you to adjust the
temperature by moving the cookware to
a different position on the flexible
induction cooking zone.
The hob senses the position of the
cookware and sets the heat setting
corresponding with the position. If you
place the cookware in the front you get
the highest heat setting. You can
decrease the heat setting by moving the
cookware to the back.
- -
+ +
CAUTION!
When the function operates
you can not change the heat
setting manually.
General information:
• Use only one pot when you operate
the function.
• The maximum pot diameter for the
function is 240 mm. If you use
cookware larger tan 240 mm the
function deactivates. Flexible zone
changes into standard cooking zone
mode. The zone keeps the heat
setting from the last position of Pro
Cook function.
• When the function operates you
change the heat setting only by
moving the cookware.
• When you use the function you can
also use the Reminder
Lift up the cookware and
place in a different position
on the flexible zone if you
want to change the heat
setting. Sliding the cookware
can cause scratches and
discolouration of the surface.
You can add the shortcut to
the function to the status bar
on the control panel
Activating the function
To activate the function place the
cookware on the flexible zone. Touch
and choose the function from the list.
When the function operates the flexible
zone is indicated with dashes on the
control panel. To activate the function
you can also touch shortcut symbol on
the status bar .
Deactivating the function
To deactivate the function repeat the
procedure or touch
on the control panel disappears.
If two operating zones are
detected or a large
cookware is used the
function deactivates.
4.14 Timers
There are 3 timers: CountUp Timer,
Count Down Timer and Reminder.
Pro Cook. When the function
operates you can use only
Reminder.
CountUp Timer
You can use this timer to monitor how
long the cooking zone operates. The
function starts automatically and comes
on next to the cooking zone symbol in
ENGLISH 11
.
.
. The dashed area