Starting Signal Reception Of The Time Signal Manually; Choosing A Location - ADE CK 1700 Bedienungsanleitung

Starting signal reception of the time signal
manually
If the radio signal symbol to the left is no longer
displayed, the radio signals from the time signal
transmitter are no longer being received. The time
indicator nevertheless continues precisely.
− Press and hold the WAVE button until radio reception is started.
‚ If the reception was not successful, the reception symbol
fades out after a few minutes and the time on the display
continues normally.
‚ Upon successful signal reception, the radio-controlled alarm
clock adjusts itself to the time of the time signal transmitter. If
you have already carried out manual time and date settings,
these will be automatically adjusted.

Choosing a location

NOTE on material damage
‚ Protect the alarm clock from dust, shocks, extreme
44
temperatures, direct sunlight and moisture and
only place it in a dry, closed room.
DCF Radio-controlled alarm clock CK 1700