Using The Kit In Systems With A Main Entrance; Programming Buttons On Art. 4680K - Comelit 8173I Technisches Handbuch

Using the kit in systems with a main entrance

The diagrams BK/EN/109I and BK/EN/110I on page 88 and 90 show a
possible system confi guration for managing up to a max. of 30 Bravo Kits
with one Art. 4680 - Art. 4680K* placed, for example, at the entrance of a
residential complex.
Using these system diagrams, it is possible to call one of the Bravo Kits
from the main entrance equipped with Art. 4680 - Art. 4680K*.
In this confi guration it is necessary to program the buttons of Art. 4680K on
Art. 4879K (as illustrated in the procedure below); the internal units should
also be programmed with the corresponding code (see table on page 20).
For further information on the integration of Bravo Kits into Simplebus

Programming buttons on Art. 4680K

-V
1
4
22 22
+V
2
5
systems and the programming of the main entrance (Art. 4680 - Art.
4680K*), refer to the catalogue (no. 140) and the technical manual FT/
SB/24.
* Operating restrictions for Art. 4680K
Art. 4680K manages calls originating from ONLY digital or button modules
if they fall between address 1 and address 10.
► Set the user code using the dip
switches, see table on page 20
3
3
optional