Operation And Indicating Elements; Specifications - Honeywell Esser Bedienungsanleitung

9

Operation and Indicating elements

Each incoming message activates the internal buzzer in addition to the corresponding visual
display (LED). The buzzer can be acknowledged and silenced via Button >Buzzer control<
but the visual display remains active until the alarm reason is cancelled. The buzzer is
activated again with each new message. Each of the LED can be individually labelled, e.g.
with zone number or a description, with the removable labelling strips.
Button >Buzzer control<
Button >Display test<
To verify that all LED and the buzzer indicators are operating, the lamp test
should be carried out at regular intervals.
10

Specifications

Analog loop
Nominal voltage
External power supply
Operating voltage
Quiescent current
Alarm current (32 LED and buzzer)
LED output
Properties
Display
Connection terminals
Ambient temperature
Storage temperature
Rel. humidity
Protection rating
Housing
Colour
Front
Weight
Dimension (w x h x d)
VdS approval
FB 796670 / 06.09
Operating and Installation Instruction LED Indicating Panel
Deactivation of the buzzer in case of an event
All visual indicators of the LED Indicating Panel light up until the
button is released. The buzzer remains activated until it is
cancelled manually
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
Part No. 764790
Standard
---
10 V DC to 15 V DC
approx. 1 mA @ 12 V DC
380 mA @ 12 V DC
12 V DC / 10 mA
32 LED, red
max. 1,5 mm²
-5 °C to +50 °C
-25 °C to +75 °C
≤ 95 % rel. humidity (no condensation)
IP 40
ABS plastic
white, similar to RAL 9003
blue, similar to RAL 5003
approx. 1 kg
270 x 221 x 71 (mm)
G 200092
Part No. 804791
Loop
8 V DC to 42 V DC
15