Table of contents
1
6
General ............................................................................................................................11
7
Installation instruction ......................................................................................................12
7.1
Installation...............................................................................................................12
8
Wiring...............................................................................................................................13
8.1
8.2
9
10
Specifications ..............................................................................................................15
Additional and updated Informations
The described features, specifications and product related informations in this
manual correspond to the date of issue (refer to date on the front page) and
may differ due to modifications and/or amended Standards and Regulations of
the System design, Installation and Commissioning.
Updated informations and declaration of conformity are available for comparison
on the www.esser-systems.de homepage.
esserbus
6
General
The LED Indicating Panels (Part No. 764790 / 804791) have been designed as additional
displays in hazard alarm systems. They can be used for optical and audible signalling of up to
32 messages.
These LED Indicating Panels are not suited for supplying initial information to
the fire alarm brigade!
Features
LED Indicating Panel-Standard (Part No. 764790)
•
32 separate inputs for LED activation
•
connection via the integrated 32-way terminal
•
for use in hazard alarm systems or as a remote indicator
LED Indicating Panel-Loop (Part No. 804791)
•
32 display LED controlled via the integrated esserbus
•
for connection to the esserbus
8000 / IQ8Control
FB 796670 / 06.09
Operating and Installation Instruction LED Indicating Panel
®
®
and essernet
are registered trademarks in Germany.
®
and esserbus
®
transponder with 32 optocoupler
®
PLus loop of the fire alarm system
11