Equipping The Incident Light Turret Disk - Leica DM3 XL Gebrauchsanweisung

Note:
The service life of the LED is about 25000 hours.
It can not be replaced. If necessary, a replace-
ment lamp housing is provided by the Leica
Microsystems CMS GmbH Technical Service (or-
der no. 11 504 199).
Fig. 7 Filter cube,
front side
Fig. 8 Filter cube,
back side

6.5 Equipping the Incident Light Turret Disk

Insert the filter and reflector cubes in the follow-
ing manner:
• Remove the analyzer (Fig. 9.1).
• Remove the front cover (Fig. 9.2) by pulling it
toward the front.
Fig. 9 Incident light and fluorescence axis
1 Analyzer
2 Front panel
3 Sticker
1
2
Incident light/fluorescence axis without front panel
Fig. 10
Fig. 11 Inserting the filter cube
6. Assembling
3
21