Paramondo CURVE Montageanleitung Seite 8

Sicherheitshinweise • safety instructions • Informations sur la sécurité • Información de seguridad • Indicazi-
8
oni generali di sicurezza • Veiligheidsinstructies • Ogólne zasady bezpieczeństwa • Genel Güvenlik Uyarıları
of sophisticated manufacture and processing technology.
Such phenomena do not diminish the value and the usability of the
awning. To prevent irritation, we would like to expressly point out the
following properties, within the scope of consumer awareness:
Img. 1 Img. 2
Img. 4
Bending folds
They originate at the moment of the manu-
facture and when the sun protection fabric is
folded. A dark line, which originates because
of the folding of the fibre, may become visible
in back light particularly in case of bright
colours (Light refraction). (Img. 1)
Waviness in the seam and length area
It can occur in the side seams, in the vicinity of the seams and in the
centre of the lengths. The cover is laid double on the seams. This
results in different rolling diameters.
The tension that arises due to the folding arms and the drooping of
the roller tube and/or the front profile may enhance these effects.
Waviness can originate if a water pocket forms during heavy rain.
(Img. 2,3)
Stretching of the side lengths
The cover is usually kept permanently taut by means of an active
spring system. Seams and hems have a reinforcing effect but must
also undergo the most strain. When the cover is rolled up the hems
and seams lay on top of one another, this increases the pressure and
tension even more. Seams and hems are pressed flat and increase in
length. When the awning is moved out this can lead to the side seams
hanging down slightly. (Img. 4)
The awning motor TDMK-B fulfils the requirements of the European and national directives.
2006/42/EG – Machinery Directive
2014/53/EU – Radio Equipment Directive
2014/30/EU – EMC Directive
2014/35/EU – Low Voltage Directive
The above-mentioned products fulfil the requirements of German Product Safety Law (ProdSG) with regard to the protection of safety and
healthiness.
DIN EN 60335-1:2012
DIN EN 60335-2-97:2010
DIN EN 62233:2008
Schoenberger Germany Enterprises GmbH & Co. KG
Zechstraße 1-7
82069 Hohenschäftlarn
Img. 3
www.paramondo.de
Waterproofness/resistance to rain
Polyester fabric is coated with a water-resistant finish and remains
resistant to rain during a short, light shower of rain with good care
and a pitch angle of at least 14°. During longer periods and/or heavy
rainfall the awning must remain closed or rolled up in order to avoid
damage. Should the cover have become wet the awning must be ex-
tended for drying later, in order to avoid the formation of mould stain.
Further information about the properties of awning covers as well
as the most important state-of-the-art cases of application is to be
found in the guidelines for evaluation of ready-made awning fabrics -
Publisher:
ITRS Industrieverband Technische Textilien - Rollladen-
Sonnenschutz e.V.
Battery regulation – in compliance with § 12
sentence n.1-3 of the regulation about the
collection and disposal of used batteries and
accumulators of the 27th March 1998 (BGBl. I
S. 658) it is pointed out to the customer, that as
final consumer, he is legally obligated to return
used batteries. Batteries or accumulators can
be returned free of charge after use at the point
of sale, also with us, or in the immediate vicinity of the customer.
Batteries or accumulators which contain pollutants are marked with
the symbol of a crossed-out dustbin. Near the crossed-out dustbin
symbol there are the chemical names of the pollutants. „Cd" stands
for cadmium, „Pb" for lead, „Hg" for mercury „Li" for lithium, „Ni" for
nickel, „Mh" for metal hydride and „Zi" for zinc.
As manufacturer in line with ElektroG we are registered with the com-
petent German registry Stiftung Elektro-Altgeräte Register, Benno-
Strauß-Str. 1, 90763 Fürth under the following registration number:
WEEE-Reg.-Nr. DE 41060608 for: JAROLIFT ® ™
Michael Mayer
21.02.2017 Director