Special Functions; Dialling Mode; Dialling Pause - switel DE311 Bedienungsanleitung

10 Special Functions

Dialling mode

The telephone can be operated in analogue exchanges (PULSE mode)
as well as new, digital exchanges (TONE/DTMF mode). The dialling mode
is controlled via the menu. Chapter 5 indicates the location within the
menu.
11 PABX / Supplementary Services
R−button on private branch exchanges
If the telephone is connected to a private branch exchange, functions
such as transferring calls and automatic call back can be used via the R
button. Refer to the operating manual provided with your private branch
exchange as to which Recall (Flash) time must be set in order to use
these functions. The sales outlet where you purchased the exchange can
provide information as to whether the telephone will work properly with the
exchange. The Recall (Flash) time is set using the menu. Chapter 5 indi-
cates the location within the menu.

Dialling pause

When using private branch exchanges, it is necessary to dial an access
code to obtain the dialling tone for an outside line. When using some
older private branch exchanges, it takes a little time before the dialling
tone becomes audible. In the case of such private branch exchanges, a
dialling pause can be inserted after the number for an outside line in order
to continue dialling directly without having to wait for the dialling tone. The
dialling pause is inserted by pressing the P button.
The actual phone number is dialled a certain time after the number for an
outside line.
The dialling pause can also be entered with the phone numbers
in the phone book [phone number memory].
Special Functions